Offshore Fuel & Chemical

TranStore® Liquid IBCs for Offshore Fuel & Chemicals

Storage and transport for

• Diesel Fuel
• Helicopter/Jet Fuel
• Chemicals
• Drilling Fluids
• Mixing & Blending Applications

STANDARD FEATURES

• One-piece sloped bottom provides uniform drainage
• 1/4” thick combination lift lugs for offshore and domestic applications
• TranStore tanks meet and exceed UN regulations and are authorized for shipment of combustible and flammable liquids per Title 49 CFR
• Stackable to 3 high, when warehousing only
• Lifting lug complies with standards of 10% over shackle diameter, 25% over jaw gap
• Limitless service life with minimal maintenance
• Patented TranSeal pressure relieving bung plug
• 22-1/2” diameter top manway with 3” fusible vent/fill cap in center, EPDM gasket, and bolted clamp ring assembly
• 304 or 316/316L construction available

OPTIONAL FEATURES

• Specialty material and weld finishes
• Alternate base sizes and capacities
• Center discharge
• Heating and cooling options
• Sight level gauges
• Pressure/vacuum relief vents
• Custom valves and fittings

Introducing the next generation of tote cross-sectional lifting. Our dual lifting point system pairs traditional four-corner lifting lugs with inline padeyes, allowing your slings to remain intact while the tanks are stacked. Padeyes can be included on new TranStore tanks or retrofitted on existing IBCs.

TranStore Lifting Frame

• Heavy steel construction
• Designed for use with 350 to 550 gallon TranStore IBC
• Four point overhead lift and four way fork entry
• 56” x 56” x 92” overall height
• DNV 2.7-1 type approved designs available

Lifting Bridle

• Four legged sling assembly
• Various rope diameters, shackles, and lengths available
• DNV type approved and DNV certified models available

DOT T-Code Tanks

TranStore Portable “T-Code” Pressure Vessels are engineered, fabricated, and tested to DOT T-Code requirements, and are constructed per ASME code standards (Section VIII,
Division I) and labeled.

• Stainless steel
• DOT certified guard
• Pressure and vacuum relief valves
• Insulation with outer jacket
• Vertical or horizontal designs
• Custom valves, manways, and connection

Custom Metalcraft’s commitment to quality and performance starts with a promise—and it depends on the dedicated force of experts who bring it to life, with engineering, design, and manufacturing that exceed the standard. For demanding industries like energy exploration, American craftsmanship sets our equipment apart from the rest.