DISTILLING EQUIPMENT

TranStore® Liquid IBCs for Offshore Fuel & Chemicals

PUT OUR CUSTOM INTO YOUR CRAFT.

The distilling industry loves its traditions. We are proud to say ours is one of them. Since its founding by the Holden family in 1977, Custom Metalcraft has been working with distillers to create hard-working equipment with the same attention to quality and craftsmanship that our customers put into their fine liquors. Today, we are still family-owned and committed to quality equipment that is all American-made.

The TranStore® Intermediate Bulk Container is the most advanced liquid-handling tank available. With a patented one-piece top and superior bottom drain design, TranStore IBCs set the industry standard for performance. Every TranStore tank meets or exceeds all IBC requirements, per Title CFR49 of the Hazardous Material Guide. Design approvals include UN31A and UL142.

TranStore Fermentation Tanks are designed specifically for fermentation. Both open and closed top tanks can be easily handled with a forklift or pallet jack.

STANDARD FEATURES

One-piece sloped bottom assures uniform and complete drainage
1/4″ thick combination lifting lugs for offshore and domestic applications
10 gauge stainless steel IBC construction with 2B finish (if applicable)
22-1/2” diameter top fill opening with removable drum cover
Pressure relieving and venting device
EPDM gasket with plated clamp ring
Stackable up to four IBC containers high, dependent upon tank size and surrounding conditions
One-piece stamped valve guard
2″ top bung opening
2″ stainless steel ball valve (if applicable)
Tank mounted operating instructions and warning labels
Near limitless service life with minimal maintenance

OPTIONAL FEATURES

304/304L stainless steel or 316/316L stainless steel
Wide range of capacities, heights & base dimensions
Customizable drum cover for top opening
Customized manways available with different lid sizes, specifications& methods of attachment
Wide range of available gasket materials
Wide range of valve types, sizes & locations
Multiple fitting types & locations
Heating & cooling jackets
Material & weld finishes to 320 grit
Volume calibration chart
Pressure-relieving & venting device

TranStore Metal IBC Standard Sizes

GAL	LITERS	A (in)	A (mm)	B (in)	B (mm)	C (in)	C (mm)
180	682	36	914	36	914	40.5	1029
180	682	42	1067	48	1219	29	737
215	814	42	1067	42	1067	35	889
250	947	42	1067	48	1219	35	889
260	984	42	1067	42	1067	41	1041
300	1136	42	1067	48	1219	41	1041
305	1155	42	1067	42	1067	47	1194
350	1325	42	1067	48	1219	47	1194
395	1496	42	1067	42	1067	59	1499
450	1704	42	1067	48	1219	59	1499
485	1836	42	1067	42	1067	71	1803
550	2082	42	1067	48	1219	71	1803

All dimensions are approximate. Tanks may bulge slightly when full.

“The experience was fantastic! I was most impressed with the quality and durability. Our Custom Metalcraft equipment is the the most cost-effective equipment we own.”

ALLEN JAROSZ, Artisan grain distillery