Poly IBCs for Chemical and Industrial Applications
TranStore Voyager Intermediate Bulk Containers (IBC) and poly tanks are manufactured in the USA and are virtually maintenance free. The Voyager line of tanks provide the same long-term reusable value as the competition, with the same quality guarantee and specialized customer service Custom Metalcraft is known for.
Get real with the All New TranStore® VMax Poly Tank


TranStore® Voyager
VMax Poly IBC
330 GALLONS
Standard Lid 2″ Outlet
330 Gallon | Length | Width | Height |
---|---|---|---|
#519903 | 45″ | 45″ | 64.2″ |
STANDARD FEATURES
- Patent-pending innovative design
- Cylindrical bottle and top corner design provide better load distribution
- and superior strength over traditional square bottles
- 1/2” thick (nom.) HDPE translucent cylindrical bottle
- 6” ID top fill port with buttress threads, tamper-evident bolting, SantopreneTM gasket and 2” vented poly plug
- Two 2” buttress bungs with caps and SantopreneTM gaskets mounted in top head
- Proprietary 2” polypropylene full port ball valve with Viton O-rings, PTFE seats, quick disconnect with dust cap and lanyard
- Recessed protected valve location
- Patent-pending bottom design, slopes from five points to discharge
- Four-way fork entry
- UV stabilized
- Molded-in graduated volume markings
- Rated for 1.9 specific gravity
- Compatible stacking with other industry models
- Warehouse stackable up to three units full, depending upon specific gravity of product
- Approximately 28 units per truckload, loaded upright, or 36 if transported on sides
- 100 KPA design tested (14.7 psi)
- UN31H2 designed, tested and labeled
- Working pressure up to 3 psi
- Provision for lanyard attachment to top head
NEW! Tamper Evident Quick Connect
OPTIONAL FEATURES
- Alternate pallet colors available
- Viton gasket material
- Corner inserts to accommodate products that require limited head space
- Dip tubes

REPLACEMENT PARTS
ITEM | DESCRIPTION | PART NO. |
1 | 6” ID screw cap assembly complete with 2” vent plug & Santoprene™ gasket | 521354 |
2 | 6” Santoprene™ gasket (opt. Viton™ gasket avail.) | 555004 |
3 | 2” Poly vent plug | 557906 |
4 | 2” Poly plug with buttress threads | 564602 |
5 | 2” Ball valve with camlock end & dust cap | 564593 |
6 | Replacement dust cap | 556290 |
See V2 Voyager | See Top Liftable | See Pressure Rated
Voyager V2

VOYAGER 2 POLY IBC
The tapered bottom design provides full discharge of the product. The base is the most durable in the industry, and completely protects the valve and sump area. UN31H2 designed, tested and labeled.



Standard Features
- 45″ x 45″ base
- 275 Gallon and 330 Gallon models
- HDPE translucent bottle
- 7″ polypropylene fill cap with Santoprene gasket
- 2″ polypropylene fusible vent with Santoprene gasket
- Sloped bottom for 99% drainage
- Recessed protected valve
- Heavy duty attached pallet
- Stacking lugs for alignment and support
- Four-way fork entry
- Two-way pallet jack access
- Two-way anti-tip safety bars
- UV stabilized
- Molded-in volume indicator
- Stackable with other industry models
- Rated for 1.9 specific gravity fluids
- Holds 15.9 pounds/gallon fluid weight
Optional Features
- Alternate gasket material
- Customized pallet color
- Pressure and vacuum relief vents
- 22″ top opening
330 Gallon Voyager 2 Poly IBC Closure Instructions
In compliance with Title 49 CFR Sec. 178.2(2) to ensure the leakproof performance of the IBC, model #516553, the closures must be torqued to the following:Item | Torque Setting |
---|---|
7" OD Threaded Neck | 75 lb-ft (102 Nm) |
2" Bung Plug in 7" Lid | 30 lb-ft (40 Nm) |
3" Buttress Fastener (Pallet to Bottle) | 30 lb-ft (40 Nm) |
2" Ball Valve to Bottle | 40 lb-ft (54 Nm) |
VOYAGER PLUS POLY TANK
The Voyager Plus is a cylindrical poly inner tank housed in a top-liftable pallet cage and is stackable with other industry models.



Features
- Cylindrical bottle with domed top
- 46″ x 46″ base dimensions
- HDPE translucent bottle
- 7″ polypropylene fill cap with Santoprene gasket
- 2″ polypropylene fusible vent with Santoprene gasket
- Sloped bottom for 99% drainage
- Recessed protected valve
- Heavy duty attached pallet
- Stacking lugs for alignment and support
- Four-way fork entry
- Two-way pallet jack access
- Two-way anti-tip safety bars
- UV stabilized
- Molded-in volume indicator
- Stackable with other industry models
- Rated for 1.9 specific gravity fluids
- Holds 15.9 pounds/gallon fluid weight
VOYAGER XL POLY TANK
The 535-gallon poly Voyager XL’s innovative design enables the liquid packager to ship 62% more product than a conventional 330-gallon poly IBC. The Voyager XL all poly tank was developed using FEA results to ensure safety and longevity.

The bottle and pallet are manufactured with state-of-the-art High Density Polyethylene (HDPE) with UV inhibitor to protect the IBC when stored outdoors. The unique pallet-to-bottle nesting design of the Voyager XL helps maximize warehouse space by stacking one on top of another. The pallet is accessible on all four sides using both fork lifts and pallet jacks, making handling of this IBC easy and safe. The oversized pallet cradles the bottle and protects it from items stacked nearby and from rugged handling. It can be equipped with an optional overhead lifting package to enable overhead hoist or crane use.



Features
- 535-gallon HDPE translucent bottle
- UN/DOT approved (UN31H2)
- 14.5 psi test pressure rating
- Stackable lugs for alignment and support
- 2″ Banjo® polypropylene with quick disconnect dust cap
- 7″ Polypropylene fill cap with Santoprene® gasket with vented bung
- Sloped bottom for drainage
- Recessed valve for protection
- Optional top lifting package available
- Customized colors and graphics available
- Typical transport capacities
- 53′ tractor trailer fits 20 Voyager XL tanks
- 20′ offshore/intermodal container fits 4 Voyager XL tanks
- 40′ offshore/intermodal container fits 9 Voyager XL tanks