IBC Leak-Proof Testing Procedure

  1. Seal all container apertures.
  2. Pressurize the container to 2.9 psig using a regenerative air source.
  3. Coat all the seams and joints with a soap and water solution. (Soap solution recommended is 4 oz of soap to 3 gallons of water.
  4. Pressure must be held for a period of time sufficiently long enough to assure detection of leaks, but no less than 5 minutes.
  5. After completion of leak detection, safely depressurize the container.

Care should be exercised when working with pressurized containers, as injuries may occur.